• ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound or noise in air
• ISO 140-1:1990 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratories
• ISO/DIS 140-1 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (Revision of ISO 140-1:199 0)
• ISO 140-2:1991 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 2: Determination, verification and application of precision data
• ISO 140-3:1995 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 3: Laboratory measurements of airborne sound insulation of building elements
• ISO 140-4:1978 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 4: Field measurements of airborne sound insulation between rooms
• ISO 140-5:1978 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 5: Field measurements of airborne sound insulation of facade elements and facades
• ISO 140-6:1978 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 6: Laboratory measurements of impact sound insulation of floors
• ISO 140-7:1978 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 7: Field measurements of impact sound insulation of floors
• ISO 140-8:1978 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a standard floor
• ISO/DIS 140-8 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 8: Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a solid standard f loor (Revision of ISO 140-8:1978)
• ISO 140-9:1985 Acoustics -- Measurements of sound insulation in buildings and of building elements -- Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum abov e it
• ISO 140-10:1991 Acoustics -- Measurement of sound insulation in buildings and of building elements -- Part 10: Laboratory measurement of airborne sound insulation of small building elements
• ISO/DIS 230-5 Acceptance code for machine tools -- Part 5: Noise
• ISO 266:1975 Acoustics -- Preferred frequencies for measurements
• ISO/DIS 266 Acoustics -- Preferred frequencies (Revision of ISO 266:1975)
• ISO 354:1985 Acoustics -- Measurement of sound absorption in a reverberation room
• ISO 362:1994 Acoustics -- Measurement of noise emitted by accelerating road vehicles -- Engineering method
• ISO 512:1979 Road vehicles -- Sound signalling devices -- Technical specifications
• ISO 532:1975 Acoustics -- Method for calculating loudness level
• ISO 717-1:1982 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation in buildings and of interior building elements
• ISO/DIS 717-1 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 1: Airborne sound insulation (Revision of ISO 717-1:1982 and iso 717-3:1982)
• ISO 717-2:1982 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation
• ISO/DIS 717-2 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation (Revision of ISO 717-2:1982)
• ISO 717-3:1982 Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 3: Airborne sound insulation of facade elements and facades
• ISO 1680-1:1986 Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machinery -- Part 1: Engineering method for free-field conditions over a reflecting plane
• ISO 1680-2:1986 Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machinery -- Part 2: Survey method
• ISO 1683:1983 Acoustics -- Preferred reference quantities for acoustic levels
• ISO 1996-1:1982 Acoustics -- Description and measurement of environmental noise -- Part 1: Basic quantities and procedures
• ISO 1996-2:1987 Acoustics -- Description and measurement of environmental noise -- Part 2: Acquisition of data pertinent to land use
• ISO 1996-3:1987 Acoustics -- Description and measurement of environmental noise -- Part 3: Application to noise limits
• ISO 1999:1990 Acoustics -- Determination of occupational noise exposure and estimation of noise-induced hearing impairment
• ISO 2151:1972 Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use (To be replaced by future ISO 3989 of TC 43)
• ISO 2204:1979 Acoustics -- Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings
• ISO 2249:1973 Acoustics -- Description and measurement of physical properties of sonic booms
• ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles
• ISO 2510:1989 Sound-reducing composition cork in tiles
• ISO 2671:1982 Environmental tests for aircraft equipment -- Part 3.4: Acoustic vibration
• ISO 2922:1975 Acoustics -- Measurement of noise emitted by vessels on inland water-ways and harbours
• ISO 2923:1975 Acoustics -- Measurement of noise on board vessels
• ISO/DIS 2923 Acoustics -- Measurement of noise on board vessels (Revision of ISO 2923:1975)
• ISO 2969:1987 Cinematography -- B-chain electro-acoustic reponse of motion-picture control rooms and indoor theatres -- Specifications and measurements
• ISO 3095:1975 Acoustics -- Measurement of noise emitted by railbound vehicles
• ISO/DIS 3095 Acoustics -- Measurement of noise emitted by railbound vehicles (Revision of ISO 3095:1975)
• ISO/TR 3352:1974 Acoustics -- Assessment of noise with respect to its effect on the intelligibility of speech
• ISO 3381:1976 Acoustics -- Measurement of noise inside railbound vehicles
• ISO 3382:1975 Acoustics -- Measurement of reverberation time in auditoria
• ISO 3740:1980 Acoustics -- Determination of sound power levels of noise sources -- Guidelines for the use of basic standards and for the preparation of noise test codes
• ISO 3741:1988 Acoustics -- Determination of sound power levels of noise sources -- Precision methods for broad-band sources in reverberation rooms
• ISO 3742:1988 Acoustics -- Determination of sound power levels of noise sources -- Precision methods for discrete-frequency and narrow-band sources in reverberation rooms
• ISO 3743-1:1994 Acoustics -- Determination of sound power levels of noise sources -- Engineering methods for small, movable sources in reverberant fields -- Part 1: Comparison method for hard-walled test rooms
• ISO 3743-2:1994 Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Engineering methods for small, movable sources in reverberant fields -- Part 2: Methods for special reverbera tion test rooms
• ISO 3744:1994 Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Engineering method in an essentially free field over a reflecting plane
• ISO 3745:1977 Acoustics -- Determination of sound power levels of noise sources -- Precision methods for anechoic and semi-anechoic rooms
• ISO 3746:1995 Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
• ISO 3747:1987 Acoustics -- Determination of sound power levels of noise sources -- Survey method using a reference sound source
• ISO 3822-1:1983 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 1: Method of measurement
• ISO 3822-2:1984 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps
• ISO/DIS 3822-2 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 2: Mounting and operating conditions for draw-off taps and mixing valves (Revis ion of ISO 3822-2:1984)
• ISO 3822-3:1984 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances
• ISO/DIS 3822-3 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 3: Mounting and operating conditions for in-line valves and appliances (Revisio n of ISO 3822-3:1984)
• ISO 3822-4:1985 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances
• ISO/DIS 3822-4 Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances (Revision of ISO 38 22-4:1985)
• ISO 3891:1978 Acoustics -- Procedure for describing aircraft noise heard on the ground
• ISO 4043:1981 Booths for simultaneous interpretation -- Mobile booths -- General characteristics and equipment
• ISO 4366:1979 Echo sounders for water depth measurements
• ISO 4412-1:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
• ISO 4412-2:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
• ISO 4412-3:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array
• ISO 4869-1:1990 Acoustics -- Hearing protectors -- Part 1: Subjective method for the measurement of sound attenuation
• ISO 4869-2:1994 Acoustics -- Hearing protectors -- Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
• ISO/TR 4869-3:1989 Acoustics -- Hearing protectors -- Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes
• ISO/TR 4870:1991 Acoustics -- The construction and calibration of speech intelligibility tests
• ISO/DIS 4871 Acoustics -- Declaration and verification of noise emission values of machinery and equipment (Revision of ISO 4871:1984)
• ISO 4872:1978 Acoustics -- Measurement of airborne noise emitted by construction equipment intended for outdoor use -- Method for determining compliance with noise limits
• ISO 5128:1980 Acoustics -- Measurement of noise inside motor vehicles
• ISO 5129:1987 Acoustics -- Measurement of noise inside aircraft
• ISO 5130:1982 Acoustics -- Measurement of noise emitted by stationary road vehicles -- Survey method
• ISO 5131:1982 Acoustics -- Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method
• ISO/DIS 5131 Acoustics -- Tractors and machinery for agriculture and forestry -- Measurement of noise at the operator's position -- Survey method (Revision of ISO 5131:1982)
• ISO 5135:1984 Acoustics -- Determination of sound power levels of noise from air terminal devices, high/low velocity/pressure assemblies, dampers and valves by measurement in a reverberation room
• ISO/DIS 5135 Acoustics -- Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (Revision of ISO 5135:1984)
• ISO 5136:1990 Acoustics -- Determination of sound power radiated into a duct by fans -- In-duct method
• ISO 5347-15:1993 Methods for the calibration of vibration and shock pick-ups -- Part 15: Testing of acoustic sensitivity
• ISO 6081:1986 Acoustics -- Noise emitted by machinery and equipment -- Guidelines for the preparation of test codes of engineering grade requiring noise measurements at the operator's or bystander's position
• ISO 6189:1983 Acoustics -- Pure tone air conduction threshold audiometry for hearing conservation purposes
• ISO 6190:1988 Acoustics -- Measurement of sound pressure levels of gas turbine installations for evaluating environmental noise -- Survey method
• ISO 6242-3:1992 Building construction -- Expression of users' requirements -- Part 3: Acoustical requirements
• ISO 6393:1985 Acoustics -- Measurement of airborne noise emitted by earth-moving machinery -- Method for determining compliance with limits for exterior noise -- Stationary test condition
• ISO/DIS 6393 Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Stationary test conditions (Revision of ISO 6393:1985)
• ISO 6394:1985 Acoustics -- Measurement of airborne noise emitted by earth-moving machinery -- Operator's position -- Stationary test condition
• ISO/DIS 6394 Acoustics -- Measurement at the operator's position of noise emitted by earth-moving machinery -- Stationary test conditions
• ISO 6395:1988 Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Dynamic test conditions
• ISO 6396:1992 Acoustics -- Measurement at the operator's position of noise emitted by earth-moving machinery -- Dynamic test conditions
• ISO 6416:1992 Measurement of liquid flow in open channels -- Measurement of discharge by the ultrasonic (acoustic) method
• ISO/DIS 6798 Reciprocating internal combustion engines -- Measurement of emitted airborne noise -- Engineering method and survey method
• ISO 6926:1990 Acoustics -- Determination of sound power levels of noise sources -- Requirements for the performance and calibration of reference sound sources
• ISO/DIS 6926 Acoustics -- Determination of sound power levels of noise sources -- Requirements for the performance and calibration of reference sound sources (Revision of ISO 6926:1990)
• ISO 7182:1984 Acoustics -- Measurement at the operator's position of airborne noise emitted by chain saws
• ISO 7188:1994 Acoustics -- Measurement of noise emitted by passenger cars under conditions representative of urban driving
• ISO 7196:1995 Acoustics -- Frequency-weighting characteristic for infrasound measurements
• ISO 7216:1992 Acoustics -- Agricultural and forestry wheeled tractors and self-propelled machines -- Measurement of noise emitted when in motion
• ISO 7235:1991 Acoustics -- Measurement procedures for ducted silencers -- Insertion loss, flow noise and total pressure loss
• ISO 7731:1986 Danger signals for work places -- Auditory danger signals
• ISO 7779:1988 Acoustics -- Measurement of airborne noise emitted by computer and business equipment
• ISO/DIS 7779 Acoustics -- Measurement of airborne noise emitted by computer and business equipment (formerly ISO/DIS 14605)
• ISO/TR 7849:1987 Acoustics -- Estimation of airborne noise emitted by machinery using vibration measurement
• ISO 7917:1987 Acoustics -- Measurement at the operator's position of airborne noise emitted by brush saws
• ISO 7960:1995 Airborne noise emitted by machine tools -- Operating conditions for woodworking machines
• ISO 8201:1987 Acoustics -- Audible emergency evacuation signal
• ISO/DIS 8253-3 Acoustics -- Audiometric test methods -- Part 3: Speech audiometry
• ISO 8297:1994 Acoustics -- Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment -- Engineering method
• ISO/DIS 8500 Airborne noise emitted by machine tools -- Operating conditions for mechanical presses up to 2500 kN
• ISO/DIS 8528-10 Reciprocating internal combustion engine driven alternating current generating sets -- Part 10: Measurement of airborne noise by the enveloping surface method
• ISO 8579-1:1993 Acceptance code for gears -- Part 1: Determination of airborne sound power levels emitted by gear units
• ISO 8687:1987 Cinematography -- Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records -- Method of measurement
• ISO 8960:1991 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use -- Measurement of emission of airborne acoustical noise
• ISO 9052-1:1989 Acoustics -- Determination of dynamic stiffness -- Part 1: Materials used under floating floors in dwellings
• ISO 9053:1991 Acoustics -- Materials for acoustical applications -- Determination of airflow resistance
• ISO/DIS 9207 Manually portable chain-saws with internal combustion engine -- Determination of sound power levels -- Engineering method (grade 2)
• ISO 9295:1988 Acoustics -- Measurement of high-frequency noise emitted by computer and business equipment
• ISO 9296:1988 Acoustics -- Declared noise emission values of computer and business equipment
• ISO 9533:1989 Earth-moving machinery -- Machine-mounted forward and reverse audible warning alarm -- Sound test method
• ISO 9568:1993 Cinematography -- Background acoustic noise levels in theatres, review rooms and dubbing rooms
• ISO/DIS 9611 Acoustics -- Characterization of sources of structure-borne sound with respect to sound radiation of connected structures -- Measurement of velocity at the contact points of machinery when resiliently m ounted
• ISO/DIS 9612 Acoustics -- Guidelines for the measurement and assessment of exposure to noise in a working environment
• ISO 9613-1:1993 Acoustics -- Attenuation of sound during propagation outdoors -- Part 1: Calculation of the absorption of sound by the atmosphere
• ISO 9614-1:1993 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points
• ISO/DIS 9614-2 Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 2: Measurement by scanning
• ISO 9645:1990 Acoustics -- Measurement of noise emitted by two-wheeled mopeds in motion -- Engineering method
• ISO 9703-2:1994 Anaesthesia and respiratory care alarm signals -- Part 2: Auditory alarm signals
• ISO 9902:1993 Textile machinery acoustics -- Determination of sound pressure levels and sound power levels emitted by textile machines -- Engineering and survey methods
• ISO 10053:1991 Acoustics -- Measurement of office screen sound attenuation under specific laboratory conditions
• ISO/DIS 10302 Acoustics -- Method for the measurement of airborne noise emitted by small air-moving devices
• ISO 10494:1993 Gas turbines and gas turbine sets -- Measurement of emitted airborne noise -- Engineering/survey method
• ISO/DIS 10534-1 Acoustics -- Determination of sound absorption coefficient and impedance or admittance -- Part 1: Impedance tube method
• ISO/DIS 10843 Acoustics -- Methods for the physical measurement of single impulses or bursts of noise
• ISO 10844:1994 Acoustics -- Specification of test tracks for the purpose of measuring noise emitted by road vehicles
• ISO/DIS 10845 Acoustics -- Frequency weighting "A" for noise measurement
• ISO/DIS 10846-1 Acoustics -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 1: Principles and guidelines
• ISO/DIS 10846-2 Acoustics -- Laboratory measurement of vibro-acoustic transfer properties of resilient elements -- Part 2: Dynamic stiffness of elastic supports for translatory directions -- Direct method
• ISO/DIS 10847 Acoustics -- In-situ determination of insertion loss of outdoor noise barriers of all types
• ISO/DIS 10884 Manually portable brush-cutters and grass-trimmers with internal combustion engine -- Determination of sound power levels -- Engineering method (Grade 2)
• ISO 11094:1991 Acoustics -- Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attach ments
• ISO/DIS 11200 Acoustics -- Noise emitted by machinery and equipment -- Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified posit ions
• ISO/DIS 11201 Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Engineering method in an essentially free fi eld over a reflecting plane
• ISO/DIS 11202 Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Survey method in situ
• ISO/DIS 11203 Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions
• ISO/DIS 11204 Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Method requiring environmental corrections
• ISO/DIS 11429 Ergonomics -- System of danger and non-danger signals with sound and light
• ISO/DIS 11546-1 Acoustics -- Determination of sound insulation performances of enclosures -- Part 1: Measurements under laboratory conditions (for declaration purposes)
• ISO/DIS 11546-2 Acoustics -- Determination of sound insulation performances of enclosures -- Part 2: Measurements in situ (for acceptance and verification purposes)
• ISO/DIS 11654 Acoustics -- Sound absorbers for use in buildings -- Rating of sound absorption
• ISO 11691:1995 Acoustics -- Measurement of insertion loss of ducted silencers without flow -- Laboratory survey method
• ISO/DIS 11819-1 Acoustics -- Method for measuring the influence of road surfaces on traffic noise -- Part 1: Statistical pass-by method
• ISO/DIS 11820 Acoustics -- Testing of silencers in situ
• ISO/DIS 11821 Acoustics -- Determination of the in situ sound attenuation of a removable screen
• ISO/DIS 11957 Acoustics -- Determination of sound insulation performance of cabins -- Laboratory and in situ measurements
• ISO/DIS 12001 Acoustics -- Noise emitted by machinery and equipment -- Rules for the drafting and presentation of a noise test code
• ISO/TR 12155:1994 Commercial vehicles -- Obstacle detection device during reversing -- Requirements and tests
• ISO/DIS 13332 Reciprocating internal combustion engines -- Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines
• ISO/DIS 13473-1 Acoustics -- Characterization of pavement texture using surface profiles -- Part 1: Determination of mean profile depth
• ISO/DIS 13475-1 Acoustics -- Determination of sound emission quantities for stationary audible warning devices used outdoors -- Part 1: Field measurements

Copyright © ISO, 1995